|
|
|
|
|
Model |
Condition
New/Used/Ex Demo |
|
| Adam
|
ANF10 - 2 way passive nearfield
7" bass driver, A.R.T tweeter. Magnetic shielding.
50Hz-35kHz
|
New |
£310
order
now |
| Adam
|
A7 - The A7 matches the A.R.T.
tweeter with a state of the art 6.5“ woofer that introduces a new
cone material combining high rigidity and high internal damping
with low weight, resulting in an extremely accurate monitor with
all the clarity, detail and spectacular imaging traditionally associated
with the ADAM name. The A7 is powered by two 50W RMS amps (one per
driver). The front panel sports both a power switch and volume control.
The rear panel houses controls for tweeter level and two shelving
filters for high and low frequencies. The unit also features both
balanced (XLR) and unbalanced (RCA) input connectors, allowing it
to be used in almost any audio application.
46Hz - 35kHz
|
New |
£495
order
now |
Adam
|
P11A - 2 way active nearfield.
7" bass driver. ART tweeter. magnetic shielding, volume &
room control eq.
48Hz - 35kHz
|
New |
£950
order
now |
| Adam
|
P22A - 2 way active nearfield 8"
bass driver. ART tweeter, magnetic shielding, volume & room
control eq.
38Hz - 35kHz
|
New |
£1150
order
now |
| Adam
|
P33A - 3 way active nearfield.
2 x 7" bass driver. ART tweeter. magnetic shielding. volume
& room eq
34Hz - 35kHz
|
New |
£1395
order
now |
| Adam
|
S1A - 2 way active nearfield. 6"
bass driver. ART tweeter. magnetic shielding. volume & room
eq control.
40Hz - 35kHz
|
New |
£1125
order
now |
| Adam
|
S2A - 2 way active nearfield. 7"
bass driver. ART tweeter. volume & room eq control.
35kHz - 35kHz
|
New |
£1520
order
now |
| Adam
|
S2.5A - 2 way active nearfield.
ART tweeter. volume & room eq control.
34Hz - 35kHz
|
New |
£1775
order
now |
Adam
|
S3A - 3 way active nearfield/midfield.
2 x 7" bass driver. ART tweeter. volume & room eq control.
32Hz - 35kHz
|
New |
£2295
order
now |
Adam
|
S4VA - Vertical 3 way active midfield.
11" bass driver. ART mid & tweeter.volume & room eq
control.
28Hz - 35kHz
|
New |
£3365
order
now |
| Adam
|
S4A - Horizontal 4way active midfield.
2 x 9 " bass driver. ART mid & tweeter.volume & room
eq control.
28Hz - 35kHz
|
New |
£3812
order
now |
| Adam
|
S4CA - Column 4 way active midfield.
11" bass driver. ART mid & tweeter.volume & room eq
control.
28Hz - 35kHz
|
New |
£4045
order
now |
| Adam
|
S5VA - Vertical 5 way active midfield/main.
12.5" & 9" bass driver. ART mid & tweeter.volume
& room eq control.
23Hz - 35kHz
|
New |
£5200
order
now |
| Adam
|
S5A -4 way active midfield/main.
2 x 9" bass driver. ART mid & tweeter.volume & room
eq control.
26Hz - 35kHz
|
New |
£5940
order
now |
| Adam
|
S6A mk2 - 4 way active main. 2
x 12.5" bass driver. 2 x ART mid & 1 x tweeter.volume &
room eq control.
23Hz - 35kHz
|
New |
£13775
order
now |
| Adam
|
S1 - 2 way passive nearfield. 6
" bass driver. ART tweeter. magnetical shielding
100 watt 45Hz - 35kHz
|
New |
£575
order
now |
| Adam
|
S2 - 2 way passive nearfield. 7"
bass driver. ART tweeter.
150 watt 40Hz - 35kHz
|
New |
£825
order
now |
| Adam
|
S2.5 -2 way passive nearfield.
9 " bass driver. ART tweeter.
180 watts 38Hz - 35kHz
|
New |
£1125
order
now |
| Adam
|
S3 - 3 way passive nearfield/midfield.
2 x 7" bass driver. ART tweeter.
300 watt 35Hz - 35kHz
|
New |
£1375
order
now |
| Adam
|
S4V Vertical 3 way passive nearfield.
2 x 7" bass driver. ART mid & tweeter.
250 watt 32Hz - 35kHz
|
New |
£2295
order
now |
| Adam
|
S4 - Horizontal 3 way passive nearfield.
2 x 9" bass driver. ART mid & tweeter.
400 watts 32Hz - 35kHz
|
New |
£2800
order
now |
| Adam
|
S4C - Column 4 way passive midfield.
2 x 9" bass driver. ART mid & tweeter.
400 watts 32Hz - 35kHz
|
New |
£3030
order
now |
| Adam
|
S5V - Vertical 3 way passive midfield/main.12.5"
& 9" bass driver. ART mid & tweeter.
800 watts 28Hz - 35kHz
|
New |
£3815
order
now |
| Adam
|
S5 - 4 way passive midfield/main.
2 x 9" bass driver. ART mid & tweeter.
800 watts 30Hz - 35kHz
|
New |
£4455
order
now |
| Adam
|
S6 mk2 - 4 way passive main. 2
x 12.5" bass driver. 2 x ART mid & tweeter.
800 watts 23Hz - 35kHz
|
New |
£8040
order
now |
|
|
|
|
 |
Model |
Condition
New/Used/Ex Demo |
|
Dynaudio
AIR SERIES |
All components in an AIR system
are connected through the TC Link network that distributes control
information as well as Audio in-between all system components. This
makes it possible to control a multichannel system from the sweet
spot using the AIR Remote or the AIR Soft. This combined with "local
intelligence" inside each monitor and subwoofer, provides AIR series
with powerful integrated features such as: - 192 kHz support via
Dual Wire - Acoustic Placement Compensation. - Central and Remote
control of system and parameters. - Global Volume control. - Bass
Management with selectable frequency crossover points. - Advanced
Bass Management. - Integrated Bass Management. Selectable freq.
crossover points. - Preset Storage and Recall. - Programmable reference
levels. - Level alignment in 0,1dB steps. - Integrated Parametric
EQ’s and delay in each monitor (only accessible with PC-IP) and
other installers tools for better integration with acoustic environment.
- A single parametric EQ for the sub channel - Supporting 2.1, 5.1,
6.1 and 5.3 setups.
|
|
|
Dynaudio |
AIR 6 - 2-way Active Nearfield,
6.5" woofer & 1.1 softdome tweeter.
Stereo Pair with AIR Soft - developed for both stereo and multichannel
monitoring in any demanding environment including: - Post Production
- Music Recording and Mixing - Film Editing (smaller rooms) - DVD
authoring and Mastering - 5.1 Production (Audio or Audio for pictures)
- Broadcast - Edit suites Typical listening distance 1.2-2m / 4-7ft
Typical room size 50-100m3 / 1600-3500ft3
|
Available as:
Digital Input
Digital & Analogue Input
Also available with:
AIR Remote
Prices From:
|
£1515
order now |
Dynaudio |
AIR15 - 2-way Active Nearfield,
10" woofer & 1.1 softdome tweeter.
Stereo Pair with AIR Soft - developed for both stereo and multichannel
monitoring in any demanding production environment including: -
Post Production - Music Recording and Mixing - Film Editing (smaller
rooms) - DVD authoring and Mastering - 5.1 Production (Audio or
Audio for pictures) - Broadcast - Edit suites Combining technology
from Dynaudio and TC, AIR 15 offers ultimate precision and sound.
Typical listening distance 1.5-2.5m / 5-8,5ft Typical room size
75-125 m3 / 2600-4400 ft3
|
Available as:
Digital Input
Digital & Analogue Input
Also available with:
AIR Remote
Prices From:
|
£2175
order now |
Dynaudio |
AIR20 - 3-way Active Nearfield,
10" woofer, 5.5" one-piece molded polyprop midrange & 1.1 soft dome
tweeter.
The AIR 20 offers transparency, consistent speaker performance
and outstanding possibilities for optimizing performance in different
Acoustical environments. The AIR 20 is developed for both stereo
and multi-channel monitoring in demanding production environments
including: - Post Production - Music Recording and Mixing - Film
Editing (smaller rooms) - DVD authoring and Mastering - 5.1 Production
(Audio or Audio for pictures) - Broadcast - Edit suites Combining
technology from Dynaudio and TC, AIR 20 offers ultimate precision
and sound. The possibility of rotating the Mid-High module offers
the flexibility for optimal placement in a wide range of applications.
Typical listening distance 1.5-3m / 5-10.2ft Typical room size 80-130
m3 / 2800-4600 ft3
|
Available as:
Digital Input
Digital & Analogue Input
Also available with:
AIR Remote
Prices From:
|
£2830
order now |
Dynaudio |
AIR25 - 3-way Active Nearfield,
2x10" woofer, one 5.5" one-piece molded polyprop midrange & one
1.1 soft dome tweeter.
The AIR 25 offers transparency, consistent speaker performance
and outstanding possibilities for optimizing performance in different
Acoustical environments. Operating at a staggering sample rate of
192 kHz supported via Dual Wire, the integration with DAWs is seamless.
A digital output can be fed directly into the AIR 25 supporting
2.1, 5.1, 6.1 and 5.3 setups. The AIR 25 is developed for both stereo
and multi-channel monitoring in demanding production environments
including: - Post Production - Music Recording and Mixing - Film
Editing - DVD authoring and Mastering - 5.1 Production (Audio or
Audio for pictures) - Broadcast - Edit suites Combining technology
from Dynaudio and TC, AIR 25 offers ultimate precision and sound.
|
Available as:
Digital Input
Digital & Analogue Input
Also available with:
AIR Remote
Prices From:
|
£3725
order now |
Dynaudio |
AIR Base-1 is the most compact
dedicated AIR series active subwoofer. Intended for smaller rooms
AIR Base-1 offers high performance where space is an issue. Use
one AIR Base-1 with AIR 6 in smaller rooms or link several Base-1’s
in bigger rooms increasing acoustic output 6 dB for each additional
unit. Through the TC Link (proprietary AIR network) AIR Base-1 integrates
with AIR series monitors and delivers unique features such as integrated
bass management and presets. To be used with both stereo and multichannel
AIR systems in any demanding production environment including: Post
Production and Editing suites. Music Recording and Mixing. DVD authoring
and Mastering. 5.1 Production (Audio or Audio for pictures). OB
Vans. Combining technology from Dynaudio and TC, AIR Base-1 offers
ultimate precision and total integration with AIR Series. AIR Base
subwoofers can be used only with AIR Series monitors. Typical room
size range for one AIR Base-1 is 30-60 m3 / 1000-2000 ft.3 Typical
room size range for two or three AIR Base-1’s is 50-100m3 / 1600-3500ft3
|
TC
Link Input Only |
£795
order now |
Dynaudio |
AIR Base-2 – a dedicated AIR
series active subwoofer – is suited for small to medium sized rooms
together with AIR 6 or AIR 15. Several units can be linked where
in bigger rooms increasing acoustic output 6 dB for each additional
unit linked. Through the TC Link (proprietary AIR network) AIR Base-2
integrates with AIR series monitors and delivers unique features
such as integrated bass management and presets. To be used with
both stereo and multichannel AIR systems in any demanding production
environment including: Post Production and Editing suites. Music
Recording and Mixing. DVD authoring and Mastering. 5.1 Production
(Audio or Audio for pictures). Broadcast. Film editing. Combining
technology from Dynaudio and TC, AIR Base-1 offers ultimate precision
and total integration with AIR Series. AIR Base subwoofers can be
used only with AIR Series monitors. Typical room size range for
one AIR Base-2 is 50-100 m3 / 1600-4400 ft3 Typical room size range
for two AIR Base 2’s is 75-125 m3 / 2600-4400 ft3
|
TC
Link Input Only |
£1215
order now |
Dynaudio |
AIR Base 12 is a recent addition
to the AIR series, and with a total frequency response of 22 Hz
- 200 Hz and 500 watts of amplification, this subwoofer delivers
a clear and crisp punch to the bottom. The subwoofer sports a new
class D amp developed at the TC Electronic laboratories, which will
assure "top of the line" quality and an abundance of power and reliability.
On top of that the AIR Base 12 comes with a new 12" woofer that
was specifically designed for low frequency reproduction and extremely
tight impulse response. AIR Base 12 is a compact and dedicated AIR
series active subwoofer. Intended for smaller and medium size rooms,
AIR Base 12 offers the high performance that has become the trademark
of Dynaudio Acoustics' AIR Series. Use one AIR Base 12 with e.g.
AIR 6 or 15 in smaller rooms, or link several Base 12's in bigger
rooms with e.g. AIR 20 or 25 and increase the acoustic output with
each additional unit. Through the TC Link (proprietary AIR network)
AIR Base 12 integrates with AIR series monitors and delivers unique
features such as advanced bass management and a wealth of other
tweaking possibilities. This subwoofer will be an ideal complement
for both stereo and multichannel setups like: Editing suites. Post
Production facilities. Music recording and mixing studios. Larger
OB vans. DVD authoring and mastering. Stereo and Multichannel production.
Combining technology from Dynaudio and TC, AIR Base 12 offers ultimate
precision and total integration with AIR Series. AIR Base subwoofers
can be used only with AIR Series monitors.
|
TC
Link Input Only |
£1890
order now |
Dynaudio |
AIR Base 24 is yet another
new member of the AIR Series and it comes with a total frequency
response of 20 Hz - 200 Hz. With the massive 700 watts of amplification,
the AIR Base 24 gives the phrase "Pump up the volume" an entirely
new meaning. The subwoofer sports a new class D amp developed at
the TC Electronic laboratories, which will assure "top of the line"
quality and an abundance of power and reliability. On top of that
the AIR Base 24 comes with 2 new 12" woofer that was specifically
designed for low frequency reproduction and extremely tight impulse
response. Suited for medium and large sized rooms, this subwoofer
works splendidly with the larger monitors of the AIR Series, delivering
one of the most powerful integrated solutions for stereo and multichannel
monitoring found anywhere. The AIR Base 24 takes benefit of all
the AIR Series features like Advanced Bass Management and 192 kHz
support via dual wire integrating perfectly into demanding production
environments like: Editing suites. Post Production facilities. Music
recording and mixing studios. DVD authoring and Mastering. Stereo
and Multichannel production. Broadcast facilities. Combining technology
from Dynaudio and TC, AIR Base 24 offers ultimate precision and
total integration with AIR Series. AIR Base subwoofers can be used
only with AIR Series monitors.
|
New |
£2655
order now |
Dynaudio |
AIR Remote is a dedicated hardware
remote control that ensures convenient daily operation. AIR Remote
provides instant access to all significant operation parameters
such as global volume, reference levels, preset recall as well as
solo and mute status for each monitor. The AIR Remote is powered
through a ‘TC Link’ cable which is connected any AIR monitor. Features:
- Global volume control - Recall and Storage of three Reference
levels - Mute and Solo of individual speakers - Preset recall
|
New |
£130
order now |
Dynaudio |
AIR SOFT is a software remote
control application that runs both on MAC’s and PC’s. It is intended
for convenient daily operation and enables users to control AIR
system parameters and presets real time. Moreover AIR SOFT can be
used to back-up settings as well as to upload new software to AIR
components. A ‘TC Link to Serial Port’ converter-cable is included
with AIR SOFT. Users without a serial port on their Computer should
acquire a USB to serial port converter.
|
New |
£90
order now |
| Dynaudio |
BM15 - 2 way large passive nearfield.
6" bass driver.
43Hz - 20kHz
|
New |
£675
order now |
| Dynaudio |
BM15A - 2 way large active nearfield.
10" bass driver
40Hz - 21kHz
|
New |
£1450
order
now |
| Dynaudio |
BM5 - 2 way passive nearfield
6" bass driver. 55Hz - 29kHz
|
New |
£325
order
now |
| Dynaudio |
BM6P - 2 way passive nearfield.
6"bass driver.
43Hz - 20kHz
|
New |
£520
order now |
| Dynaudio |
BM6A - 2 way active nearfield.
6" bass driver.
41Hz - 21kH
|
New |
£1035
order now |
| Dynaudio |
M1 - 2 way passive nearfield. 2
x 4" bass driver
50Hz - 20kHz
|
New |
£1385
order
now |
| Dynaudio |
M1.5 - 2 way large passive nearfield/mid.
2 x 6 " bass driver
34Hz - 20kHz
|
New |
£1790
order
now |
Dynaudio |
M2 - 3 way midfield, with a wide
range of applications.Stereo imaging is pinpoint accurate thanks
to the computer optimised designs of the crossover and drivers,
and the M2 is capable of SPLs of up to 125dB at 1.25m as a stand
alone system. When combined with a pair of Dynaudio Acoustics subwoofers,
the system becomes a full 4 way main monitoring system capable of
very high SPLs with a full frequency response down to below 35Hz
|
New |
£TBA
order
now |
| Dynaudio
- Air Series |
5 monitors, 3 x masters & 2
x slaves. Sub woofer, hardware and software remotes.
|
New |
|
| Dynaudio |
Air 6 - 5.1 Pack 1A
|
New |
£5225
order
now |
|
|
|
|
 |
Model |
Condition
New/Used/Ex Demo |
|
Fostex |
Fostex
PM0.5 - The ideal choice for
smaller studios requiring nearfield monitoring, the perfectly formed
PM0.5 offers 70 watts of bi-amped power and produces great full range
performance with exceptional neutrality even at high Sound pressure
levels. The compact dimensions also enable accurate placement in confined
or awkward spaces, with the dispersion from the two way ported enclosure
design tailored such that it will deliver a superb sound almost regardless
of room acoustics. Features a UFLC 20mm soft dome HF unit and 130mm
LF woofer and input gain control. |
New
- per pair |
£180
order now |
Fostex |
Fostex
PM1- Perfectly proportioned
and offering the type of clear-transparent sound that singles out
a great speaker, the PM-1 is capable of producing extremely high SPLs
accurately across the full audio spectrum. With 120 watts of bi-amped
power and a bass response that’s full and dynamic and a crisp high-end
that sparkles with vitality, the PM-1 delivers the type of sonic quality
that’s usually the domain of monitors costing thousands. Features
a UFLC 25mm soft dome HF unit, 160mm LF woofer and input gain control.
|
New |
£250
order now |
Fostex |
Fostex
PM2- Created for larger rooms,
the PM-2 has the power and sophistication and, most importantly the
versatility to handle the most demanding recording applications. Equipped
with a 200mm low frequency unit and remaining natural and transparent
right across the audio spectrum, even at high sound pressure levels,
the PM-2 is great for today’s bass heavy music. Features 240 watts
of bi-amped power, UFLC 25mm soft dome HF unit, 200mm LF woofer, separate
HF gain control, overall volume control and a 0dB / -3dB / +3dB switch
for the LF unit. |
New |
£360
order now |
|
|
|
|
|
Model |
Condition
New/Used/Ex Demo |
|
| Genelec
have been designing and manufacturing active monitoring speakers since
1978. Our current product range consists of more than 20 models and
covers most imaginable monitoring needs. Since the beginning, we have
held the belief that the job of a monitoring speaker is to find the
truth of a recording. If the truth is beautiful it will sound beautiful,
but if the truth is ugly that will be revealed as well. What ever
circumstances, a sound engineer needs to hear the inherent truth of
a recording to know how to respond to it. This has been our guiding
design principle for every one of our models from the minuscule 1029A
to the massive 1036A. Demonstrations are available for most Genelec
models and we supply a complete range of wallmounts and other accessories.
|
 |
|
|
Genelec
|
8030A
- The very compact 8030A is
a powerful bi-amplified nearfield monitor system ideal for project
and home studios, workstations, installations, and surround sound
monitoring. The MDE™ (Minimum Diffraction Enclosure™) enclosure has
rounded edges and a gently curved front and sides to achieve a very
smooth frequency response and superb imaging qualities with minimized
cabinet edge diffraction. Short term RMS @ 1 m - Peak per pair
with music material 108 dB SPL @ 1m Drivers Bass 5" Midrange - Treble
3/4" metal dome Crossover frequencies 3 kHz Free field frequency response
58 Hz - 20 kHz (± 2 dB) Amplifier power /ch Bass 40 W Midrange - Treble
40 W |
New
- per unit |
£267
order now |
Genelec
|
8040A
- Genelec 8040A Bi-Amplified
Monitoring System Boasting performance comparable to much larger systems,
but in a compact package, the bi-amplified 8040A is ideal for use
in many situations where a wide frequency response is needed but space
is limited. Uses include nearfield monitoring, project/home studios,
workstations, broadcast and TV control rooms and mobile production
vehicles. Short term RMS @ 1 m - Peak per pair with music material
115 dB SPL @ 1m Drivers Bass 6.5" Midrange - Treble 3/4" metal dome
Crossover frequencies 3 kHz Free field frequency response 48 Hz -
20 kHz (± 2 dB) Amplifier power /ch Bass 90 W Midrange - Treble 90
W |
New
- per unit |
£450
order now |
Genelec
|
8050A
- Capable of producing peak
SPL of over 120dB per pair, and with a low frequency response extending
down to 35Hz, the 8050A is a powerful wideband bi-amplified monitoring
system. It is an excellent tool for large recording studios, broadcast
and surround installations, mastering suites and TV and post-production
houses. The sophisticated low level active crossover has versatile
controls for matching the monitor to difficult acoustic environments.
Dedicated very low distortion amplifiers power the drivers, with overload
protection for each driver.Short term RMS @ 1 m - Peak per pair
with music material 120 dB SPL @ 1m Drivers Bass 8" Midrange - Treble
1" metal dome Crossover frequencies 1.8 kHz Free field frequency response
38 Hz - 20 kHz (± 2 dB) Amplifier power /ch Bass 150 W Midrange -
Treble 120 W |
New
- per unit |
£790
order now |
Genelec
|
1029A
- The extremely compact 1029A
is a powerful bi-amplified nearfield monitor system ideal for project
and home studios, digital workstations, and surround sound monitoring.
The monitor has a very rugged cast aluminium construction and magnetic
stray field shielding as default for every single unit. Vented speaker
enclosure contains an amplification unit, including an active electronic
crossover, overload protection circuitry and two power amplifiers,
one for each driver. Short term RMS @ 1 m 100 dB SPL Peak per pair
with music material 110 dB SPL @ 1m Drivers Bass 5" Midrange - Treble
3/4" metal dome + DCW Crossover frequencies 3.3 kHz Free field frequency
response 70 Hz - 18 kHz (± 2.5 dB) Amplifier power /ch Bass 40 W Midrange
- Treble 40 W |
New -
per unit |
£267
order
now |
Genelec
|
2029A
- Genelec 2029A allows you
to monitor what you have in your digital format. The 2029A is a stereo
monitoring system, and is acoustically similar to analog 1029A. You
can use it with the 7050A subwoofer. You can also use it in surround
audio systems. The Directivity Control Waveguide™ (DCW ™) technology
provides excellent frequency balance even in difficult acoustic environments.
The alignment of the whole signal processing chain inside the 2029A
from the digital input connector to the loudspeaker elements is carefully
balanced, to make sure that you hear the whole digital truth and nothing
but the truth. All you have to do is to supply the digital signal,
and adjust for the volume you desire.Input word length 16 - 24
bits Input format IEC958, S/P-DIF, EIJAC CP-340 Digital input RCA
75 Ohm Connector type - Input sampling rate No de-emphasis 25 - 55
kHz Using de-emphasis 44.1 and 48 kHz SPL Short term RMS @ 1 m 100
dB SPL Peak per pair with music material 110 dB SPL @ 1m Drivers Bass
5" Midrange - Treble 3/4" metal dome + DCW Crossover frequencies 3.3
kHz Free field frequency response 70 Hz - 18 kHz (± 2.5 dB) Amplifier
power /ch Bass 40 W Midrange - Treble 40 W |
New -
per pair |
£730
order
now |
Genelec
|
1030A
- The Genelec 1030A is a very
compact bi-amplified active monitor system, which has performance
comparable to much larger systems. The vented speaker enclosure has
an amplifier unit set into the back. This unit contains an active
electronic crossover, overload protection circuitry and two power
amplifiers: one for each driver. The system’s excellent dispersion
and precise imaging together with its compact size make it ideal for
near field monitoring, broadcast and TV control rooms, mobile vans,
home studios and travelling engineers. Short term RMS @ 1 m 105
dB SPL Peak per pair with music material 115 dB SPL @ 1m Drivers Bass
6 1/2" Midrange - Treble 3/4" metal dome + DCW Crossover frequencies
3.5 kHz Free field frequency response 55 Hz - 18 kHz (± 2.5 dB) Amplifier
power /ch Bass 80 W Midrange - Treble 50 W |
New
- per unit |
£505
order now |
Genelec
|
1031A
- The Genelec 1031A is a two-way
active monitor system, consisting of a vented enclosure with a multiple
amplifier unit set into the back. The amplifier unit contains a low
signal level active crossover, two power amplifiers and overload protection
for each driver. This design provides high output, low coloration
and broad bandwidth. The system's excellent dispersion and precise
imaging together with its compact size make it ideal for near field
monitoring, broadcast and TV control rooms, mobile vans, home studios
and travelling engineers. Short term RMS @ 1 m 110 dB SPL Peak
per pair with music material 120 dB SPL @ 1m Drivers Bass 8" Midrange
- Treble 1" metal dome + DCW Crossover frequencies 2.2 kHz Free field
frequency response 48 Hz - 22 kHz (± 2.5 dB) Amplifier power /ch Bass
120 W Midrange - Treble 120 W |
New -
per unit |
£875
order
now |
Genelec
|
1032A
- The Genelec 1032A is a two-way
active monitoring system including magnetically shielded drivers,
speaker enclosure, multiple power amplifiers and active low signal
level crossover. Due to its compact size , this system is ideal for
high power near field monitoring. Furthermore, it is well suited to
general purpose broadcasting applications, TV control rooms, mobile
vans and CD mastering as well as home studios. Short term RMS @
1 m 113 dB SPL Peak per pair with music material 124 dB SPL @ 1m Drivers
Bass 10" Midrange - Treble 1" metal dome + DCW Crossover frequencies
1.8 kHz Free field frequency response 42 Hz - 21 kHz (± 2.5 dB) Amplifier
power /ch Bass 180 W Midrange - Treble 120 W |
New -
per unit |
£1105
order now |
Genelec
|
S30D
- The Genelec S30D is a three-way
Digital Monitoring System including a digital audio interface, balanced
analog audio input, loudspeaker drivers, speaker enclosure, multiple
power amplifiers and active, low level crossovers. All these are carefully
aligned and housed within the loudspeaker cabinet. Featuring a 96
kHz/24-bit digital audio interface and a proprietary ribbon tweeter
capable of reproducing up to 50 kHz acoustic output, the S30D is a
no compromise design. The fast, low distortion amplifiers are capable
of driving a stereo system to peak output levels in excess of 122
dB SPL at 1 m with program signals. Versatile crossover controls allow
for precise matching of the speaker system to different acoustic conditions.
Designed for relatively small control rooms and available in vertical
and horizontal versions, this system is ideal for multichannel digital
workstations, mastering work, general purpose broadcasting and television
studios, post production facilities and mobile recording vehicles.
The high output and absolute reproduction accuracy make the S30D an
ultimate nearfield monitor in recording studios. Input word length
16 - 24 bits Input format AES/EBU Digital input XLR 110 Ohm Connector
type - Input sampling rate No de-emphasis 29 - 100 kHz Using de-emphasis
44.1 kHz SPL Short term RMS @ 1 m 111 dB SPL Peak per pair with music
material 122 dB SPL @ 1m Drivers Bass 8" Midrange 3 1/2" Treble Ribbon
tweeter Crossover frequencies 420 Hz, 4 kHz Free field frequency response
36 Hz - 48 kHz (± 2.5 dB) Amplifier power /ch Bass 120 W Midrange
120 W Treble 120 W |
New -
per unit |
£1440
order now |
Genelec
|
1037C
- Tri-amplified Monitoring
System The Genelec 1037C is a three-way active monitoring system including
loudspeaker drivers, speaker enclosure, multiple power amplifiers
and active, low signal level crossovers. Designed for moderate sized
control rooms this system is ideal for audio recording studios, general
purpose broadcasting and television studios, digital workstations
and post-production facilities and mastering suites. The 1037C is
designed to perform well both as a free-standing monitor and flush
mounted into the control room wall. Short term RMS @ 1 m 116 dB
SPL Peak per pair with music material 126 dB SPL @ 1.7m Drivers Bass
12" Midrange 5" + DCW Treble 1" metal dome + DCW Crossover frequencies
420Hz, 3.2 kHz Free field frequency response 37 Hz - 21 kHz (± 2.5
dB) Amplifier power /ch Bass 180W Midrange 120W Treble 120W |
New -
per unit |
£2095
order now |
Genelec
|
1038B -
Genelec 1038B is a three-way active monitoring system including
loudspeaker drivers, speaker enclosure, multiple power amplifiers
and active, low signal level crossovers. Designed for medium sized
control rooms this system is ideal for music recording studios,
project studios, film and video post-production and broadcast monitoring.
Mastering suites are also tailored for, where broad bandwidth, high
SPL's and extended low frequency response are essential. The 1038B
is designed to perform well both as a free-standing monitor and
flush mounted into the control room wall. Short term RMS @ 1
m 120 dB SPL Peak per pair with music material 124 dB SPL @ 2m Drivers
Bass 15" Midrange 5" + DCW Treble 1" metal dome + DCW Crossover
frequencies 410 Hz, 3 kHz Free field frequency response 35 Hz -
20 kHz (± 2.5 dB) Amplifier power /ch Bass 400 W Midrange 120 W
Treble 120 W
|
New
- per unit |
£2985
order now |
Genelec
|
1038BC
- The Genelec 1038BC is a
dedicated center channel speaker for three channel (LCR) and Surround
systems. Its slim and compact cabinet has been designed for optimum
placement in the limited space above or below video monitors or screens.
As its name suggests, the Genelec 1038BC is best suited for use as
a center channel speaker with a pair of Genelec 1038B active monitors.
The 1038BC employs the same midrange, treble drivers and Directivity
Control Waveguide ™ (DCW™) as a standard 1038B, as well as the same
amplifier unit to ensure complete tonal compatibility. Genelec 1038BC
is a three-way active monitoring system including magnetically shielded
loudspeaker drivers, speaker enclosure, multiple power amplifiers
and low signal level crossovers. Designed for medium sized control
rooms this system is also ideal for vedio and film post-production
studios, multichannel music recording and broadcast monitoring. DVD
mastering is also well tailored for where broad bandwidth, high SPL's
and extended low frequency response are essential. The separate amplifier
unit is built into a rack mount chassis for easy fitting into a standard
19" equipment rack.Short term RMS @ 1 m 120 dB SPL Peak per pair
with music material 124 dB SPL @ 2m Drivers Bass 2 x 10" Midrange
5" + DCW Treble 1" metal dome + DCW Crossover frequencies 410 Hz,
3 kHz Free field frequency response 35 Hz - 20 kHz (± 2.5 dB) Amplifier
power /ch Bass 200 W x 2 Midrange 120 W Treble 120 W |
New -
per unit |
£3315
order now |
Genelec
|
D1034B
- Main Control Room Monitoring
System The Genelec 1034B is a powerful monitor system, designed for
large control rooms. It consists of a 160 litres speaker enclosure
and a 7U 19" equipment rack which contains active crossovers, three
channel power amplifiers and driver protection circuitry. The speakers
are designed for flush mounting in the control room wall, although
they may be used free standing and can produce peak sound pressure
levels in excess of 125 dB. Bass, midrange and treble controls are
included to allow the speakers to be matched to the acoustic conditions
in different control rooms. Short term RMS @ 1 m 123 dB SPL Peak
per pair with music material 125 dB SPL @ 2m Drivers Bass 2 x 12"
Midrange 5" + DCW Treble 1" metal dome + DCW Crossover frequencies
400Hz, 3.5 kHz Free field frequency response 33 Hz - 20 kHz (± 2.5
dB) Amplifier power /ch Bass 400 W x 2 Midrange 350 W Treble 120 W
|
New
- per unit |
£5275
order now |
Genelec
|
1034BC
- The Genelec 1034BC is a
dedicated center channel speaker for three channel (LCR) and Surround
Sound systems. Its cabinet has been designed for optimum placement
in the limited space above or below of a video monitor or screen.
It can also be used in vertical orientation, on either side of a video
monitor or screen. The Genelec 1034BC is best suited for use as a
center channel speaker with a pair of standard Genelec 1034B monitoring
systems. The 1034BC employs the same mid, treble and bass drivers
and Directivity Control Waveguide ™ (DCW™) as a standard 1034B and
the amplifier unit is also the same to ensure complete tonal compatibility.
Genelec 1034BC is a three-way active monitoring system including magnetically
shielded loudspeaker drivers, speaker enclosure, multiple power amplifiers
and active, low signal level crossovers. The 1034BC is recommended
to be flush mounted into the control room wall, but it can also be
used as a freestanding monitor. The separate amplifier unit is built
into a rack mount chassis for easy fitting into a standard 19" 7U
equipment rack. The unique Directivity Control Waveguide (DCW) Technology
provides excellent stereo imaging and frequency balance even in difficult
acoustic environments. Versatile crossover controls allow for precise
matching of the speaker system to different acoustic conditions. Short
term RMS @ 1 m 123 dB SPL Peak per pair with music material 125 dB
SPL @ 2m Drivers Bass 2 x 12" Midrange 5" + DCW Treble 1" metal dome
+ DCW Crossover frequencies 400Hz, 3.5 kHz Free field frequency response
33 Hz - 20 kHz (± 2.5 dB) Amplifier power /ch Bass 400 W x 2 Midrange
350 W Treble 120 W |
New
- per unit |
£5945
order now |
Genelec
|
1039A
- The Genelec 1039A is a very
powerful monitor system, designed for large control rooms. It consists
of a 320 litres speaker enclosure and a 7U 19" equipment rack which
contains active crossovers, three channel power amplifiers and driver
protection circuitry. The speakers are designed for flush mounting
in the control room wall, although they may be used free standing
and can produce peak sound pressure levels in excess of 126 dB. Bass,
midrange and treble controls are included to allow the speakers to
be matched to the acoustic conditions in different control rooms.
The sensitivity of the system to its environment is minimized by the
unique Directivity Control Waveguide™ (DCW™) Technology, which provides
excellent stereo imaging and frequency balance even in difficult acoustic
situations. The system can be used in both vertical and horizontal
orientations by simply rotating the DCW unit. Short term RMS @
1 m 126 dB SPL Peak per pair with music material 126 dB SPL @ 2m Drivers
Bass 2 x 15" Midrange 5" + DCW Treble 1" metal dome + DCW Crossover
frequencies 400Hz, 3.2 kHz Free field frequency response 31 Hz - 20
kHz (± 2.5 dB) Amplifier power /ch Bass 400 W x 2 Midrange 350 W Treble
120 W |
New -
per unit |
£6025
order now |
Genelec
|
1035B
- The Genelec 1035B is an
extremely powerful monitor system, designed for large control rooms.
It consists of a 320 net liter speaker enclosure and a 19" electronics
rack, which contains active crossovers, three channel power amplifiers
and sophisticated protection and diagnostic circuitry. The speakers
are designed for flush mounting in the control room wall, although
they may be used free standing and can produce peak sound pressure
levels in excess of 136 dB. Bass, midrange and treble controls are
included to allow the speakers to be matched to the acoustic conditions
in different control rooms. The sensitivity of the system to its environment
is minimized by the unique Directivity Control Waveguide™ (DCW™) Technology,
which provides excellent stereo imaging and frequency balance even
in difficult acoustic situations. The system can be used in both vertical
and horizontal orientations by simply rotating the DCW unit. Short
term RMS @ 1 m 131 dB SPL Peak per pair with music material 136 dB
SPL @ 2m Drivers Bass 2 x 15" Midrange 2 x 5" + DCW Treble 1" compression
driver + DCW Crossover frequencies 400Hz, 3.5 kHz Free field frequency
response 30 Hz - 20 kHz (± 2.5 dB) Amplifier power /ch Bass 1100 W
x 2 Midrange 600 W Treble 300 W |
New
- per unit |
£14450
order now |
Genelec
|
1036A
- The Genelec 1036A is an
extremely powerful monitor system, designed for large control rooms.
It consists of a 430 net liter speaker enclosure and a 19" electronics
rack, which contains active crossovers, three channel power amplifiers
and sophisticated protection and diagnostic circuitry. The 1036A is
designed for flush mounting in the control room wall, although it
may be used free standing and can produce peak sound pressure levels
in excess of 136 dB. Bass, midrange and treble controls are included
to allow the speaker to be matched to the acoustic conditions of different
control rooms. The sensitivity of the system to its environment is
minimized by the unique Directivity Control Waveguide (DCW ™) Technology,
which provides excellent stereo imaging and frequency balance even
in difficult acoustic situations. The system can be used in both verical
and horizontal orientations by simply rotating the DCW unit. Short
term RMS @ 1 m 131 dB SPL Peak per pair with music material 136 dB
SPL @ 2m Drivers Bass 2 x 18" Midrange 2 x 5" + DCW Treble 1" compression
driver + DCW Crossover frequencies 400Hz, 3.5 kHz Free field frequency
response 21 Hz - 20 kHz (± 2.5 dB) Amplifier power /ch Bass 1100 W
x 2 Midrange 600 W Treble 300 W |
New -
per unit |
£15295
order now |
Genelec
|
7050B
- The new Genelec 7050B LSE™
subwoofer provides perfect partner to the 8020A for both stereo and
surround sound applications. The 7050B extends the LF response down
to 25 Hz with amazing bass articulation. This is made possible in
such a compact enclosure thanks to Genelec's patented Laminar Spiral
Enclosure (LSE™) technology. With 5 main input channels and an LFE
channel with 85/120 Hz reproduction bandwidth selection, the 8020A/7050B
system fulfills the needs of 5.1 productions. You can also use the
7050B to complement the 8030A monitor. The 7050B is designed to complement
Genelec's 8020A active monitors in stereo and surround applications,
and the 8030A in stereo only setup. The subwoofer features a single
8" (205mm) proprietary driver with a 70 Watt power amplifier. It has
a frequency response from 25 Hz - 85 Hz (± 3dB), and the ability to
deliver short term sine wave of 100 dB SPL in half space at 1 metre.
Like all Genelec LSE™ active subwoofers, the 7050B also features extremely
low distortion. |
New
- per unit |
£415
order now |
Genelec
|
7060A
- Active Subwoofer Genelec
7060 Active Subwoofer is powerful and precise bass monitoring tool
for modern 6.1 or 5.1 channel Surround Sound or traditional stereo
systems. With its 29 Hz lower cut-off frequency, high sound pressure
output capability and versatile bass management systems, it can be
adapted to all low frequency monitoring situations. The amplifier
unit integrated into the cabinet contains active crossover filters,
driver overload protection circuits and power amplifiers. The in-built
bass management unit has six signal input and output channels, summed
signal output connectors and LFE input equipped with a selectable
85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch. The
Genelec Laminar Spiral Enclosure™ (LSE™) bass reflex cabinet is made
of a sheet metal rolled into a spiral shape and clamped between thick
MDF side panels. This new construction technique provides excellent
laminar flow characteristics with minimal turbulence noise and enables
an optimal packing of a very long reflex tube into a small space.
Short term RMS @ 1 m (half space) 108 dB SPL Input channels 6 Sum
out outputs 1 Driver 10" Free field frequency response 29 - 85 (120)
Hz +/- 3 dB Controls Bass level +12 to -6 dB (variable) Bass roll-off
0 to -6 dB (2 dB/step) Phase adjustment 0 to 270° (90 °/step) @85
Hz Amplifier power 120 W |
New
- per unit |
£845
order now |
Genelec
|
7070A
- Active Subwoofer Genelec
7070 Active Subwoofer is powerful and precise bass monitoring tool
for modern 6.1 or 5.1 channel Surround Sound or traditional stereo
systems. With its 19 Hz lower cut-off frequency, high sound pressure
output capability and versatile bass management systems, it can be
adapted to all low frequency monitoring situations. The amplifier
unit integrated into the cabinet contains active crossover filters,
driver overload protection circuits and power amplifiers. The in-built
bass management unit has six signal input and output channels, summed
signal output connectors and LFE input equipped with a selectable
85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch. The
Genelec Laminar Spiral Enclosure™ (LSE™) bass reflex cabinet is made
of a sheet metal rolled into a spiral shape and clamped between thick
MDF side panels. This new construction technique provides excellent
laminar flow characteristics with minimal turbulence noise and enables
an optimal packing of a very long reflex tube into a small space.
Short term RMS @ 1 m (half space) 112 dB SPL Input channels 6 Sum
out outputs 1 Driver 12" Free field frequency response 19 - 85 (120)
Hz +/- 3 dB Controls Bass level +12 to -6 dB (variable) Bass roll-off
0 to -6 dB (2 dB/step) Phase adjustment 0 to 270° (90°/step) @85 Hz
Amplifier power 250 W |
New
- per unit |
£1155
order now |
Genelec
|
7071A
- Active Subwoofer Genelec
7071A Active Subwoofer is powerful and precise bass monitoring tool
for modern 6.1 or 5.1 channel Surround Sound or traditional stereo
systems. With its 19 Hz lower cut-off frequency, high sound pressure
output capability and versatile bass management systems, it can be
adapted to all low frequency monitoring situations. The amplifier
unit integrated into the cabinet contains active crossover filters,
driver overload protection circuits and power amplifiers. The in-built
bass management unit has six signal input and output channels, summed
signal output connectors and LFE input equipped with a selectable
85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch. The
Genelec Laminar Spiral Enclosure™ (LSE™) bass reflex cabinet is made
of a sheet metal rolled into a spiral shape and clamped between thick
MDF side panels. This new construction technique provides excellent
laminar flow characteristics with minimal turbulence noise and enables
an optimal packing of a very long reflex tube into a small space.
Active Subwoofer Genelec 7071A Active Subwoofer is powerful and precise
bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound
or traditional stereo systems. With its 19 Hz lower cut-off frequency,
high sound pressure output capability and versatile bass management
systems, it can be adapted to all low frequency monitoring situations.
The amplifier unit integrated into the cabinet contains active crossover
filters, driver overload protection circuits and power amplifiers.
The in-built bass management unit has six signal input and output
channels, summed signal output connectors and LFE input equipped with
a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity
switch. The Genelec Laminar Spiral Enclosure™ (LSE™) bass reflex cabinet
is made of a sheet metal rolled into a spiral shape and clamped between
thick MDF side panels. This new construction technique provides excellent
laminar flow characteristics with minimal turbulence noise and enables
an optimal packing of a very long reflex tube into a small space.
Short term RMS @ 1 m (half space) 118 dB SPL Input channels 6 Sum
out outputs 1 Driver 2 x 12" Free field frequency response 19 - 85
(120) Hz +/-3 dB Controls Bass level +12 to -6 (variable) Bass roll-off
0 to -6 dB (2 dB/step) Phase adjustment 0 to 270° (90°/step) @85 Hz
|
New
- per unit |
£1865
order now |
Genelec
|
7073A
- Active Subwoofer The Genelec
7073A active subwoofer is a powerful and precise bass reproduction
tool for large Surround Sound or Stereo installations. Its 19 Hz lower
cut-off frequency and 124 dB sound pressure output capability are
sufficient to handle the most demanding high SPL applications. All
electronics are integrated into the subwoofer cabinet: active crossover
filters, driver overload protection circuits and power amplifiers.
The built-in bass management unit has six signal input and output
channels (L/C/R Front and L/C/R Rear), LFE input and summed signal
output connectors, providing great flexibility and easy connection.
The discrete LFE signal input is equipped with a selectable 85/120
Hz low-pass filter and a 0/+10 dB LFE sensitivity switch. The amplifiers
on the 7073A produce a total of 1000 W of short term RMS power for
four 305 mm (12") cone drivers. Driver overload protection and power-on
signal muting are included in the amplifier circuitry. Short term
RMS @ 1 m (half space) 124 dB SPL Input channels 6 Sum out outputs
1 Driver 4 x 12" Free field frequency response 19 - 85(120) Hz +/-3
dB Controls Bass level +6 to -12 dB Bass roll-off 0 to -6 dB (2 dB/step)
@ 20 Hz Phase adjustment 0 to 270° (90°/step) @85 Hz Amplifier power
1000 W |
New -
per unit |
£3545
order now |
|
|
|
|
| klein
& hummel |
Model |
Condition
New/Used/Ex Demo |
|
|
|
|
|
Klein
& Hummel 
|
O110D Monitors
When the O 110 nearfield
monitor was just on the drawing board, we set ourselves some extremely
high standards and goals. Meeting these required us to take an unconventional
approach to selecting materials and developing components, after
which we continually refined every design detail in the pursuit
of perfection. The resulting system is a compact reference monitor
with outstanding sonic qualities of the sort normally associated
only with substantially larger studio loudspeakers. For all recording,
mixing, and mastering engineers working in smaller listening environments
and studios, this nearfield monitor offers a professional “tool”
that achieves true impulse response and superbly flat frequency
response across the entire audible range, and delivers articulate
bass with a precision equal to that of many larger systems. Taming
the room KLEIN + HUMMEL places very great importance on ensuring
that the sound produced by its monitors are absolutely true to life,
even under less than ideal room conditions. The O 110 has therefore
been equip-ped with several features that provide a listening environment
as close as possible to the ideal. Switchable 8-way room-matching
EQ goes a long way to compensate for any undesirable room response
resulting from placing the speakers near a wall or a corner or on
a meter bridge. Exact imaging The high-frequency horn is calculated
to achieve a different angle of dispersion in the vertical plane
than in the horizontal. The elliptical shape of this horn serves
to narrow the horizontal dispersion, thereby substantially reducing
the early reflections from the console (comb-filter effects). At
the same time, the horizontal sweet spot is widened, giving the
sound engineer greater freedom of movement. Since console edge diffraction
and surface reflections are minimized to the point where they can
no longer muddy the sound, the imaging of the monitored material
attains a three-dimensional palpability that is a real joy to exper-ience
and work with. Use of the new material LRIM has also made it possible
to align the acoustic centers of the two drivers exactly on one
plane, parallel to the baffle, thereby preventing time and phase
coherency problems. The newest components help produce the most
outstanding sound To achieve extremely flat frequency response,
clarity, and precision, loudspeakercomponents need to be of very
high quality, carefully manufactured, and selected for their compatibility
with one another. The woofer chosen for this cabinet is a new type
of 5½” (145 mm) cone loudspeaker with a sandwich-membrane practically
eliminates harmonic distortion. As evidence, note in the cumulative
spectral decay plot that there are no nose-shaped peaks to be seen,
and therefore no muddled sonic image to be heard. An extremely long
excursion voice coil is responsible for the stunningly precise,
low-distortion bass that you can enjoy even at high levels. The
flux compensation of the woofer also helps reduce distortion dramatically,
especially in the all-important midrange region. The high-frequency
driver is equipped with a 1” (25 mm) titanium/fabric dome tweeter
which combines the transparency of titanium with the low distortion
of a fabric dome. This tweeter is fine-tuned to work specifically
with the elliptical waveguide built into the baffle. The high and
low-frequency drivers work su-perbly with each other - especially
in the cross-over region - producing exactly the kind of uniform
response and accurate rendition of the original sound that reveals
critical details to the audio professional. Both drivers are magnetically
shielded. High quality amplifiers and active crossover When it comes
to designing and building high-quality power amplifiers, KLEIN +
HUMMEL has fifty years of experience to draw upon. Each of the two
amplifiers matches the technical requirements for performance exactly,
yielding perfect phase response with the help of the precisely tuned
fourth-order crossover. The monitor is equipped with effective protection
circuitry designed to allow impulse peaks through but prevent any
thermal or physical damage. The input is electronically balanced
and can optionally be upgraded to transformer-balanced and floating
with a very high quality transformer. Elegant enclosure design The
monitor enclosure, made of a dense low-resonance composite material
called LRIM, sports an attractive, contemporary look. The non-parallel
internal walls of the cabinet prevent standing waves from forming
inside the (cabinet and thereby help eliminate resonant coloration).Threaded
bushings at the back accommodate a large variety of mounting adapters.
|
New
- Pair |
£1195
order now
|
Klein
& Hummel 
|
O300D Monitors
The goal: accurate, absolutely
uncolored sound Our aim with the O 300 D was to strive for nothing
less than perfection in developing the best compact active reference
monitor possible, with accurate, uncolored sound, superb transient
response, and ideally shaped waveguides. The O 300 D is a monitor
which draws upon all of KLEIN + HUMMEL’s years of experience in
monitor design, which has been fine-tuned through extensive computer
simulations and countless listening tests. It is indeed unique in
its class, for it does in fact deliver superlative sound absent
of colorations, precise bass response, picture-perfect dispersion
patterns, and a stunningly real soundstage with remarkable image
focus and depth. The advantages of the three-way system To authentically
re-create the sound captured in a recording-particularly a recording
of the human voice-an active three-way system was chosen. In comparison
with two-way monitors, the 300 D offers clear advantages that have
been discussed in detail earlier in this catalog. The sophisticated
three-way design employed in the O 300 D makes this loudspeaker
system extremely precise and revealing of detail, and it enables
the mixing engineer to make critical judgments with supreme confidence.
Exact localization and extraordinary sense of space By utilising
a dense, new, extremely low-resonance material called LRIM, we were
able to mould the waveguides required for optimal dispersion directly
into the baffle. The elliptical shape of the high-frequency horn
makes the dispersion angle in the vertical plane more narrow thus
reducing the amount of early reflections off the console surface
which would otherwise interfere with the direct sound from the speakers
(comb-filter effects), thereby improving spatial definition. At
the same time, the effective horizontal listening area is made wider,
giving the recording engineer greater freedom of movement in front
of the console. The use of LRIM has also made it possible to align
the acoustic centers of the two drivers exactly on one plane, parallel
to the baffle, thereby preventing time and phase coherency problems
at the crossover frequencies. This allows the individual drivers
to work together perfectly to produce a precisely detailed soundstage.
Superb sonic qualities For a loudspeaker system to achieve extremely
flat frequency response and create an authentic reproduction of
the original sound, its components need to be of very high quality,
carefully manufactured, and selected for their compatibility with
one another. The 8¼” (210 mm) cone woofer is made of a special lightweight
polypropylene material that has excellent self-damping properties.
Its long-excursion voice coil enables this driver to produce very
low frequencies at high sound pressure levels with practically no
distortion. In contrast to common bass-reflex systems, which tend
to blur the low end, the acoustic suspension system of the O 300
D delivers tight, articulate bass which is strikingly clear, detailed,
and natural, particularly in transients. The midrange is handled
by a treated fabric dome with a dia-phragm/voice coil of 3" (76
mm) in diameter. Since its mass is much lower than that of cone
drivers, it has the advantage of being able to achieve superior
impulse response and extremely uniform amplitude response. As a
result, midrange reproduction is impressively true-to-life, especially
with the human voice. The high-frequency driver is equipped with
a titanium/fabric dome that combines the transparency of a titanium
dome with the low distortion of a fabric dome. This driver has been
finely matched to its elliptical waveguide, ensuring exceptional
directivity. All three drivers are magnetically shielded, allowing
you to place the speakers directly next to video monitors or computers.
Precise room-matching The O 300 D includes very flexible room-matching
circuitry to alter the amplitude response of the monitor as needed,
depending on speaker placement, in multiple steps and in three critically
relevant frequency ranges. This flexibility can be instrumental
in turning less than ideal room acoustics into a favorable listening
environment. High-performance amplification Each of the three drivers
in the O 300 D is powered by a high-performance amplifier that is
exactly matched to the driver’s technical requirements and which
embodies KLEIN + HUMMEL’s long years of audio experience. Precisely
tuned electronic crossovers help provide proverbial operational
reliability and high amplifier output with minimal distortion. The
monitor is equipped with effective protection circuitry designed
to allow impulse peaks through and to respond with limiting only
when a voice coil is in danger of thermal overload or a power amplifier
runs the risk of overheating. Activation of the limiter is indicated
by blinking of the illuminated K + H logo. Future-proof digital
input The O 300 D is equipped with switchable inputs for analog
signals and digital signals in both AES/EBU and S/P-DIF formats.
The D/A converter incorporates the latests technology, has a wide
dynamic range, 24-bit resolution, and accomodates sampling rates
from 32 to 96 kHz. The analog input |
ASAP
Europe
Studio Monitors,
Amps, Surround & Headphones on
